background image

Wrap electrical tape (not included) around each 
individual wire connector (CC) down to the wire. 

        

WARNING

:  Make sure no bare wire or wire 

strands are visible after making connections. Place 
GREEN and WHITE connections on opposite side 
of box from the BLACK and BLUE (if applicable) 
connections.

Turn spliced/taped wires upward and gently push 
wires and wire connectors (CC) into outlet box.

 2. 

12

WIRING

E3 Wire Connector                                   x 4 

Hardware Used

CC

CC

Lowes.com/harborbreeze

2

CC

CC

NOTE

: BLACK wire is hot power for fan. BLUE wire 

is hot power for light kit. WHITE wire is common for 
fan and light kit. BARE/GREEN wire is ground.

1b. 

FAN CONTROLLED BY PULL CHAIN, 

LIGHT BY WALL SWITCH:

 If you intend to 

control the fan light with a separate wall switch, 
connect BLACK wire from fan to BLACK wire 
from ceiling. Connect BLUE wire from fan to the 
BLACK (or RED) wire from the independent wall 
switch for the light. Connect WHITE wire from fan 
to WHITE wire from ceiling. Connect all 
GROUND (GREEN) wires together from fan (on 
downrod (A) and mounting bracket (C)) to 
BARE/GREEN wire from ceiling. 

1c. 

FAN AND LIGHT CONTROLLED BY TWO 

WALL SWITCHES:

 If you intend to control the 

fan and light with separate wall switches, connect 
BLACK wire from fan to BLACK wire from the 
independent wall switch for the fan. Connect 
BLUE wire from fan to the BLACK (or RED) wire 
from the other independent wall switch for the 
light. Connect WHITE wire from fan to WHITE 
wire from ceiling. Connect all GROUND (GREEN) 
wires together from fan (on downrod (A) and 
mounting bracket (C)) to BARE/GREEN wire from 
ceiling. 

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH

BLACK

BLACK
(WALL
SWITCH)

BLUE

1b

WHITE

BLACK (POWER)

WHITE (NEUTRAL) 

GROUND/GREEN (BARE)

BLACK

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

BLACK

BLACK
(WALL SWITCH
FOR LIGHT)

BLUE

1c

WHITE

BLACK (WALL SWITCH)

WHITE (NEUTRAL) 

GROUND/GREEN (BARE)

BLACK

120V POWER 
FROM CEILING

120V POWER 
FROM CEILING

GREEN

GREEN

GREEN

GREEN

Содержание E-BDB52BNK5BC4N










































Отзывы: