Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING
: Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of box
from the black and blue (if applicable) connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (AA) into outlet box.
2.
IMPORTANT
: Using a full range dimmer
switch (not included) to control fan speed will
cause a loud humming noise from fan. To
reduce the risk of fire or electrical shock, do
NOT use a full range dimmer switch to control
fan speed.
3.
1. Temporarily lift canopy (B) to mounting bracket
(C) to determine which two canopy mounting
screws (L) in mounting bracket (C) align with
slotted holes in canopy (B) and partially loosen
these two canopy mounting screws (L).
Remove the other two canopy mounting screws
(L). Now, lift canopy (B) to mounting bracket (C)
again, aligning slotted holes in canopy (B) with
loosened canopy mounting screws (L) in
mounting bracket (C). Twist canopy (B) to lock.
Re-insert the two canopy mounting screws (L)
that were just removed and tighten all canopy
mounting screws (L) securely.
12
WIRING
AA
E3 Wire Connector x4
Hardware Used
AA
AA
AA
FINAL INSTALLATION
B
L
L
Lowes.com/harborbreeze
1
Dimmer
Switch
Speed
Switch
For illustrative purposes only
--
not
intended to cover all types of controls
2
3
1
2
3
