background image

8

9

DOWNROD STYLE FAN MOUNTING

CLOSEMOUNT STYLE FAN MOUNTING

CLOSEMOUNT STYLE FAN MOUNTING

2

3

1

4

Lowes.com/harborbreeze

Lowes.com/harborbreeze

Lowes.com/harborbreeze

Lowes.com/harborbreeze

3.  Loosen the two set screws from the yoke on 

     the top of the motor housing (G). Slip downrod 

     assembly (D) into housing yoke, aligning holes in 

     downrod assembly (D) and yoke. Insert the pin through 

     yoke and downrod assembly (D). Insert clip into pin 

     until it snaps into place. Tighten set screws.

4.  lnstall hanger ball on the top of downrod (D) into 

     mounting bracket (A) opening. Rotate fan until slot on

     hanger ball engages the tab on the mounting bracket 

     (A).

    

 Warning:

 Be carefully when aligning the tab to the slot!

     If not fully engaged, there is a possibility of fan falling, 

     which may result in serious injury or death.

You may now proceed to the WIRING section on 

page 10.  

                     

2.  Remove every other screw from the top of motor  

     housing (G) and save.

 

3.  Place the rubber gasket (EE) over the remaining     

     screws. Pull wires through hole in canopy (B), and   

     attach canopy (B) to motor housing (G). Align the       

     mounting holes with the holes in the motor and fasten  

     using the three screws removed in previous step.  

     Tighten the screws securely. 

4.  Hang the fan on the hook on the mounting bracket (A)

     using one of the non-slotted holes in the canopy (B).

1.  Remove the canopy cover (C) from the bottom of the    

     canopy (B).

B

B

A

G

G

EE

B

C

Hardware Used

EE

x 1

 Rubber Gasket

hook

3

4

D

G

A

D

clip

pin

set screw

slot

tab

Содержание CLASSIC STYLE 00819










Отзывы: