NOTE:
Black wire is hot power for fan. White
wire is common for fan and light kit. Green or
bare wire is ground.
Wrap electrical tape (not included) around each
individual wire connector (CC) down to the wire.
WARNING
: Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of
box from the black connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
CC
2.
1
2
3
Dimmer
Switch
Speed
Switch
For illustrative purposes only
--
not
intended to cover all types of controls
IMPORTANT
: Using a full range dimmer switch to
control fan speed will cause a loud humming noise
from fan. To reduce the risk of fire or electrical shock,
do NOT use a full range dimmer switch to control fan
speed.
3.
2
3
1.
WIRING
[
NOTE
: For each wire connection below, and use
one of the wire connectors (CC), making sure to
screw wire connector (CC) on in a clockwise
direction.]
Connect
BLACK
wire from fan to
BLACK
wire
from ceiling. Connect
WHITE
wire from fan to
WHITE
wire from ceiling. Connect all
GROUND
(
GREEN
) wires together from fan (on downrod and
mounting bracket) to
BARE/GREEN
wire from
ceiling.
CC
CC
1
BLACK
WHITE
GROUND/GREEN (BARE)
WHITE
WHITE
FROM FAN
120 V Power
FROM
CEILING
FAN
GREEN
BLACK
GREEN
10
Lowes.com/harborbreeze
CC
CC
CC
Hardware Used
E3 Wire Connector
x4
CC
