15
Lowes.com/harborbreeze
Modifications not approved by the party responsible for compliance could void the user's
authority to operate the equipment.
*
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
OPERATING INSTRUCTIONS
1.
1
Light Button
Brightness
Readout
Fan Button
Operation buttons on the panel of the remote control
transmitter (G):
FAN
For fan SPEED and to turn fan OFF
Pressing the button cycles the fan from HIGH to
MEDIUM to LOW and then OFF. Liquid crystal display
shows each function as button is pressed.
LIGHT
For light BRIGHTNESS and to
turn
light
OFF
Hold button down to increase or decrease light;
brightness shows as a percentage on display. Tap
button quickly to turn light on or off. If you press and
hold the button in excess of 0.7 seconds, it becomes a
dimmer. (See Step 2 on page 14 regarding dimmer
switch.) The light varies cyclically in 0.8 seconds. The
light button has an auto resume function, which keeps
the light at the same brightness as the last time it was
turned off.
AUTOMATED LEARNING PROCESS/ACTIVATING CODE
