13
FINAL INSTALLATION
4. Insert blade arm (S) through slot in the side of the
motor assembly (H). Align the holes of one blade arm
(S) with two motor screw holes in underside of the
motor assembly (H). Secure with two motor screws
(XX). Repeat this step for the remaining blade arms
(S).
Hardware Used
XX
Motor Screw
x 12
5.
Remove one and loosen the other three fitter plate
screws (L) but do not remove from fitter plate (K).
Feed the single-pin connector through center hole
in light pan (M). Align the three keyhole slots in the
light pan (M) with the loosened fitter plate screws (L).
Place the light pan (M) over the three screws and turn
the light pan (M) clockwise. Then tighten the three
fitter plate screws (L). Re-install the fitter plate screw
(L) that was removed in the previous step and tighten
firmly.
6. Remove one and loosen the other two light pan
screws (N) from the underside of the light pan (M).
Connect the Single-pin connector from the fitter plate
(K) to the Single-pin connector from the light kit (O).
Align the keyhole slots in the light kit (O) with the
loosened screws in the light pan (M). Turn light kit (O)
clockwise and replace the previously removed light
pan screw (N). Tighten all screws.
4
H
O
N
M
L
M
K
S
XX
5
6
Single-pin
Connector
Single-pin
Connector
Keyhole
Slot
Keyhole
Slot
