18
Lowes.com/harborbreeze
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
There is excessive
wobbling .
1 . The blades and/or blade arms
are loose .
2 . The blades are unbalanced .
3 . The fan mounting is not
secure .
4 . The fan is too close to the
vaulted ceiling .
5 . The set screw on the motor
housing yoke is loose .
1 . Check and tighten all screws that hold
the fan blades to the blade arms and
the blade arms to the motor .
2 . Switch one blade with a blade from the
opposite side . Or balance the fan using
the blade balancing kit (Q) .
3 .
Turn off the power. Loosen the canopy
and verify that the mounting bracket
is secure to the electrical outlet box .
The bracket must be flush without
movement against the outlet box .
4 . Use a longer downrod (sold separately)
or move the fan to another location .
5 . Lift up the yoke cover and tighten the
set screw to the yoke until secure .
The fan operates
correctly, but the
lights are not
working .
1 . The bulbs are not installed
correctly .
2 . There is a faulty wire
connection .
3 . The total power of the light is
exceeding 190W .
1 . Re-install the bulb(s) .
2 .
Turn the power off and check all
connections at the ceiling outlet box .
3 . The fan comes with a 190W limiter . When
the total watts of the lights is over 190W,
the lights do not work . Please replace the
bulbs with lower wattage bulbs .
