11
Lowes.com/harborbreeze
1
2
Braided Cable
Outlet Box
Open Loop
SECONDARY HANGING SYSTEM
1 . Feed the loop of the braided cable, preassembled to the
motor assembly (G), up through the outlet box mounted
in the ceiling .
2 . Install secondary support screw (FF), secondary spring
washer (HH) and support washer (GG) partly into the
side of the brace installed in the ceiling . Then loop
the braided cable up and over the ceiling brace and
place the open loop of the braided cable around the
secondary support screw (FF) .
Note:
The ceiling support brace may not be accessible
from below . If not, it must be accessed from above .
Immortant
: The braided cable must make a complete
circle around the support brace to secure the fan .
Hardware Used
FF
Secondary Support
Screw
x 1
Support Washer
x 1
Secondary Spring
Washer
x 1
3 . Tighten the secondary support screw (FF), securing the
braided cable .
Hardware Used
FF
Secondary Support
Screw
x 1
WARNING
: Secondary support is required for this
product . Failure to follow the steps below could result in
property damage and/or personal injury .
FF
GG
HH
Brace
FF
GG
A
HH
3
