18
O
P
1
2
3
4
5
OPERATING INSTRUCTIONS
1. Remove the battery cover from the back of the remote
and insert the battery, remote pack (N); ensure polarity
of battery matches the polarity indicated in the battery
compartment -- positive (+) to positive (+) and negative
(-) to negative (-). Replace the battery cover.
D/CFL Switch: Switch should be set to “D” to
correspond with the included dimmable bulbs. Flip to
“CFL”, to disable the dimming function if you change to
non-dimmable bulbs.
2. To operate the fan using the remote, press and release
the following buttons:
1 - High fan speed
2 - Medium fan speed
3 - Low fan speed
4 - Turns the fan off. Press and hold this button for 5
seconds to enter
Light Delay Off mode
, which will turn off
light after one minute. The LED indicator on the remote will
flash four times to confirm mode setting.
5 - Turns the light on and off. Press and hold this button
to dim or brighten the lights (if applicable).
3. The reverse switch is located on the top of the motor
assembly (G).
Using a ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat setting in
winter without feeling a difference in your comfort.
3a.
In warmer weather,
push the reverse switch to the
left to display a Sun icon, which will result in downward
airflow creating a wind chill effect.
3b.
In cooler weather,
push the reverse switch to the
right to display a Snowflake icon, which will result in
upward airflow that can help move stagnant, hot air off
the ceiling area.
Important:
Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle
position, the fan will not operate (Fig. 3c).
Fig. 3a
Fig. 3b
Fig. 3c
3
1
Remote
LED Indicator
Remote
Battery
Battery Cover
Battery Compartment
D/CFL Button
G
2
Reverse
Switch
