12
CLOSEMOUNT INSTRUCTIONS
1. Remove and discard the canopy cover (F) from the
bottom of the canopy (E).
Note:
The downrod (A), yoke cover (J) and canopy
cover (F) are not used in this type of installation.
1
2. Remove three Phillips-head closemount screws (O)
from the top of the motor assembly (G). Align the
canopy (E) with the holes in the top of the motor
assembly (G), then re-install the Phillips-head
closemount screws (O) to secure the canopy (E) to
the top of the motor assembly (G).
3. Raise the fan and place the canopy (E) on the
hook on the mounting bracket (D). Then, place the
receiver from remote pack (N) inside the mounting
bracket (D) with flat side facing the ceiling.
E
E
G
E
D
F
3
Hook
Receiver
2
O
