15
OPERATING INSTRUCTIONS
1. Using a ceiling fan will allow you to raise your
thermostat setting in summer and lower your thermostat
setting in winter without feeling a difference in your
comfort.
Note:
Wait for the fan to stop before moving the
reverse switch.
In warmer weather,
push the reverse switch left, which
will result in downward airflow creating a wind chill effect.
In cooler weather,
push the reverse switch right, which
will result in upward airflow that can help move stagnant,
hot air off the ceiling area.
IMPORTANT:
The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle
position, the fan will not operate.
2. To operate the fan using remote control, press and
release the following buttons:
( ) - Increase fan speed
( ) - Lower fan speed
( ) - Turns the fan off.
Sleep Timers:
Turn off fan after 2 hours (2hr), 4 hours
(4hr), or 8 hours (8hr).
Light Delay
- Delays turning off light for one minute which
allows safe exit from room.
Security Light
- Lights cycle on for 5-20 minutes and
off for 60 minutes simulating occupancy. Cycle repeats
continuously until disabled.
Variable Breeze
- Simulates a natural breeze, as if you
were outside.
Light Control
- Press light control to turn lights off and on.
Press and hold light control to dim or brighten the lights.
Learn
- For any reason, should it become necessary to
reprogram the remote, follow these syncing instructions:
turn off the power at the breaker box for at least 10
seconds and then turn the power back on. Within 30
seconds, press and hold the “LEARN” button on the back
of the remote until the LED indicator flashes 3 times,
signaling a successful synchronization. Once complete, the
fan will start on low speed.
1
2
Reverse Switch
Learn
Light Control
Security Light
Reverse
Variable Breeze
Light Delay
Sleep Timer
Fan
Control
