LLIGHT PLATE ASSEMBLY INSTALLATION (Continued)
4
5
6
G
4. Remove one of the three screws in the light
plate assembly (G). Slightly loosen the
remaining two screws. Assemble the socket
plate assembly (H) to the light plate assembly
(G) using the two key slots in the socket
plate assembly (H). Replace the third screw
and securely tighten all three screws. (Fig. 4)
5. Install bulb (L). (Fig. 5)
6. Securely attach glass (I) by twisting clockwise
onto the light plate assembly (G). Don’t
overtighten or force it. (Fig. 6)
CAUTION
Bulb is pressurized and may shatter. DO
NOT TOUCH BULB WITH BARE HANDS.
Fingerprints may result in shorter bulb life.
Remove fingerprints with alcohol prior to
use.
To reduce the risk of fire, use 100-watt max.
type T4-minican JD E11 tungsten halogen
bulb. Turn off the wall switch and allow the
bulb to cool for 10 minutes before
relamping.
L
I
G
H
G
14
