background image

3

2

TABLE OF CONTENTS

Safety Information............................ 2

Package Contents........................... 4

Hardware Contents...........................5

Preparation ..................................... 5

Initial Instructions ............................ 6

Downrod Style Fan Mounting ......... 7

Closemount Style Fan Mounting..... 9

SAFETY INFORMATION

WARNING

CAUTION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, operate or 

install the product.

• When using an existing outlet box, be sure the box is securely attached to the building structure  

  and can support the full weight of the fan, so to avoid potential serious injury or death.

• All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70” and local   

  electrical codes. Electrical installation should be performed by a qualified licensed electrician.

• 

DO NOT use bulbs with wattage greater than the maximum value stated on the fixture and in   

  this manual. Using a higher wattage bulb than specified will increase fixture temperature and   

  cause risk of fire.

• Disconnect the electrical supply circuit to the fan before installing kit.

• Electrical diagrams are for reference only.

• The net weight of this fan including the light kit is: 20.24 lbs.

• ELECTRIC SHOCK HAZARD - To reduce the risk of electric shock, make sure the electricity   

  has been turned off at the circuit breaker or fuse box before beginning installation. 

• PERSONAL INJURY HAZARD - To reduce the risk of injury to persons, install fan so that the   

  blades are 7 ft. above the floor.

• ELECTRIC SHOCK HAZARD  - To reduce the risk of electric shock, this fan must be installed

   with an isolating wall control switch.

ON

ON / OFF switch

NO Variable speed wall control

NO Dimmer switch

• 

FIRE, ELECTRIC SHOCK OR PERSONAL INJURY HAZARD - To reduce the risk of fire, 

electric shock, or personal injury, mount to  an outlet box marked “ACCEPTABLE FOR FAN 

SUPPORT OF 35.1 lbs OR LESS” and use the mounting screws provided with the outlet box. 

Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan 

support and may need to be replaced. Consult a qualified licensed electrician if in doubt.

• PERSONAL INJURY HAZARD - To reduce the risk of personal injury, do not bend the blade 

brackets when installing the brackets, balancing the blades, or cleaning the fan. DO NOT insert 

foreign objects in between the rotating fan blades.

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no guarantee 

that interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

 Any changes or modifications not expressly approved by the grantee of this device 

could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions: 

(1) This device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired operation.     

Wiring .......................................... 10

Final Installation .................... ...... 11

Operating Instructions ................. 15

Care and Maintenance ................ 17

Troubleshooting........................... 17

Warranty....................................... 18

Replacement Parts List .............. 18

Lowes.com/harborbreeze

Lowes.com/harborbreeze

Page 3

Page 2

Содержание 00881











Отзывы: