10
M350 Owner's Manual
S E R I E S
MuV
¨
SETTING UP THE SYSTEM
1. You will need to place the flat sections with the pole receptacle
onto the top of the speaker pole.
2. Extend the speaker stand legs and place each stand on either side
of your performance area.
3. Once the stands are set up slide the small speakers onto the
speaker stands.
4. Connect the included 1/4” to 1/4” speaker cables to the Speaker
Outputs on the bottom section of the sub speaker/mixer cabinet.
5. Plug the audio sources (microphone, mixer, mp3 player, etc) into
the Input channels on the mixer.
6. Plug the power cable into the AC jack on your sub speaker/mixer
cabinet and plug the other end of the cable into your power mains.
7. Turn on the power of the sub speaker/mixer. Slowly increase the
level on the channel you’ve connected.
8. Turn the sub knob up to the desired level to set the low frequency
response for the entire system.
