background image

FCC STATEMENTS

1.  Caution:  Changes  or  modifications  to  this  unit  not  expressly 

approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

2.  Note: This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This 

equipment generate, uses, and can radiate radio frequency energy 

and , in not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected 

•  Consult the dealer or an experienced radio/TV technician  

for help

This device complies with Part 15 of the FCC Rules. Operation is subject 

to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

RF Exposure Information

The  device  has  been  evaluated  to  meet  general  RF  exposure 

requirement. The device can be used in portable exposure condition 

without restriction.

WARRANTY/CUSTOMER SUPPORT

2 YEAR HARBINGER LIMITED WARRANTY

Harbinger provides, to the original purchaser, a two (2) year limited 

warranty on materials and workmanship on all Harbinger cabinets, 

loudspeaker and amplifier components from the date of purchase. 
For warranty support, please visit our website at w

ww.HarbingerProAudio.

com

, or contact our Support Team at 

888-286-1809

 for assistance.  

Harbinger will repair or replace the unit at Harbinger’s discretion.
This warranty does not cover service or parts to repair damage caused 

by neglect, abuse, normal wear and tear and cosmetic appearance 

to the cabinetry not directly attributed to defects in materials or 

workmanship. Also excluded from coverage are damages caused 

directly or indirectly due to any service, repair(s), or modifications of 

the cabinet, which has not been authorized or approved by Harbinger. 

This two (2) year warranty does not cover service or parts to repair 

damage caused by accident, disaster, misuse, abuse, burnt voice-

coils, over-powering, negligence, inadequate packing or inadequate 

shipping procedures. 

The sole and exclusive remedy of the foregoing limited warranty 

shall be limited to the repair or replacement of any defective or non-

conforming component. All warranties including, but not limited to, 

the express warranty and the implied warranties of merchantability 

and fitness for a particular purpose are limited to the two (2) year 

warranty period. Some states do not allow limitation on how long an 

implied warranty lasts, so the above limitation may not apply to you. 

There are no express warranties beyond those stated here. In the 

event that applicable law does not allow the limitation of the duration 

of the implied warranties to the warranty period, then the duration 

of the implied warranties shall be limited to as long as is provided by 

applicable law. No warranties apply after that period. 

Retailer and manufacturer shall not be liable for damages based 

upon inconvenience, loss of use of product, loss of time, interrupted 

operation or commercial loss or any other incidental or consequential 

damages including but not limited to lost profits, downtime, goodwill, 

damage to or replacement of equipment and property, and any 

costs of recovering, reprogramming, or reproducing any program or 

data stored in equipment that is used with Harbinger products. This 

guarantee gives you specific legal rights; you may have other legal 

rights, which vary from state to state.

Harbinger

P.O. Box 5111, Thousand Oaks, CA 91359-5111

All trademarks and registered trademarks mentioned herein are 

recognized as the property of their respective holders.
2110-21395673

Содержание LVL Series
























Отзывы: