background image

16

5 & 8-CHANNEL 

MIXERS

L502 & L802  Owner's Manual

WARRANTY

Have a question about service, warranty or parts?

Call 

888-286-1809 

(Toll Free)

 

2 YEAR HARBINGER LIMITED WARRANTY

Harbinger provides, to the original purchaser, a two (2) year limited 
warranty on materials and workmanship on all Harbinger cabinets, 
loudspeaker and amplifier components from the date of purchase. 

For warranty support, please visit our website at  

www.HarbingerProAudio.com

, or contact our Support Team at 

888-286-1809

 for assistance. Harbinger will repair or replace the unit at 

Harbinger’s discretion.

This warranty does not cover service or parts to repair damage caused 
by neglect, abuse, normal wear and tear and cosmetic appearance to the 
cabinetry not directly attributed to defects in materials or workmanship. 
Also excluded from coverage are damages caused directly or indirectly 
due to any service, repair(s), or modifications of the cabinet, which has not 
been authorized or approved by Harbinger. This two (2) year warranty 
does not cover service or parts to repair damage caused by accident, 
disaster, misuse, abuse, burnt voice-coils, over-powering, negligence, 
inadequate packing or inadequate shipping procedures. 

The sole and exclusive remedy of the foregoing limited warranty shall be 
limited to the repair or replacement of any defective or non-conforming 
component. All warranties including, but not limited to, the express 

warranty and the implied warranties of merchantability and fitness for a 
particular purpose are limited to the two (2) year warranty period. Some 
states do not allow limitation on how long an implied warranty lasts, so the 
above limitation may not apply to you. There are no express warranties 
beyond those stated here. In the event that applicable law does not allow 
the limitation of the duration of the implied warranties to the warranty 
period, then the duration of the implied warranties shall be limited to as 
long as is provided by applicable law. No warranties apply after  
that period. 

Retailer and manufacturer shall not be liable for damages based upon 
inconvenience, loss of use of product, loss of time, interrupted operation 
or commercial loss or any other incidental or consequential damages 
including but not limited to lost profits, downtime, goodwill, damage to 
or replacement of equipment and property, and any costs of recovering, 
reprogramming, or reproducing any program or data stored in equipment 
that is used with Harbinger products. This guarantee gives you specific 
legal rights; you may have other legal rights, which vary from state to 
state.

Harbinger P.O. Box 5111, Thousand Oaks, CA 91359-5111

All trademarks and registered trademarks mentioned herein are 
recognized as the property of their respective holders.

So we may serve you better, please register  on-line at www.HarbingerProAudio.com

FCC STATEMENTS

1. Caution: Changes or modifications to this unit not expressly approved by the 

party responsible for compliance could void the user’s authority to operate the 
equipment.

2. Note: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generate, uses, and can radiate radio 

frequency energy and , in not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected 

• Consult the dealer or an experienced radio/TV technician for help

10168 Harbinger Lvl L502 802 Manual.indd   16

7/8/14   3:15 PM

Содержание L502

















Отзывы: