Harbinger L1402FX-USB, Руководство пользователя

Страница: 6 / 18

6
L1402FX-USB Owner's Manual
WHAT'S ON THE FRONT PANEL
INPUT/OUTPUT JACKS:
1
Mic Input: XLR connector for a microphone-level signal. This
input also sends +48V phantom power to a microphone when
Phantom Power is switched on.
2
Line Input: A ¼" input that accepts a line-level signal.
Either a balanced (TRS) or unbalanced (TS) cable can be
plugged in here.
3
Gain Control: Controls the input gain for the selected channel,
from either the mic or line input.
4
Left/Mono Line Input: When this input is used and not the
input below, it is sent to both the left and right outputs of the
stereo channel. If L and R are both used, a stereo signal is sent
to the Main Out.
5
Main Out: Outputs controlled by the Main Mix fader.
6
Control Room Out: Outputs controlled by the Control Room/
Phones knob.
7 CTRM|Main: This is the USB routing switch. The 2-channel
USB input automatically routes to the MAIN output. If
the switch is pressed the USB input will be routed to the
CTRL RM Out instead.
Aux Send 1: Output can be connected to a stage monitor or
effects processor
Phones Out: Stereo output for driving a pair of headphones.
The output level is controlled by the Control Room/
Phones knob.
2TK Input and Output: An unbalanced RCA input for
connecting other external audio sources such as tape and CD
players or mobiles devices.
To Mix: Sends the 2TK Input to the Main outputs for live
sound applications.
To Phones (Control Room): Sends the 2TK Input to the
headphones and control room outs
9
1
2
3
4
7 8 5 6
10
11
10
11
12
8
12
9
WHAT'S ON THE BACK PANEL
1
2
1
2
Power Jack.
USB Jack.