manualshive.com logo in svg

Harbinger L1202FX, Руководство пользователя

Поделиться
Скачать
Harbinger L1202FX Скачать руководство пользователя страница 6

6

12-CHANNEL 

MIXER

L1202FX  Owner's Manual

WHAT'S ON THE FRONT PANEL 

INPUT/OUTPUT JACKS:

1

 Mic Input: XLR connector for a microphone-level signal. This 

input also sends +48V phantom power to a microphone when 
Phantom Power is switched on. 

2

 Line Input: A ¼" input that accepts a line-level signal. 

Either a balanced (TRS) or unbalanced (TS) cable can be 
plugged in here. 

3

 Gain Control: Controls the input gain for the selected channel, 

from either the mic or line input. 

4

 Left/Mono Line Input: When this input is used and not the 

input below, it is sent to both the left and right outputs of the 
stereo channel. If L and R are both used, a stereo signal is sent 
to the Main Out.

5

 Main Out: Outputs controlled by the Main Mix fader.

6

 Control Room Out: Outputs controlled by the Control Room/

Phones knob. 

7

 Aux Send: Output can be connected to a stage monitor or 

effects processor

8

 Phones Out: Stereo output for driving a pair of headphones. 

The output level is controlled by the Control Room/
Phones knob. 

1

2

3

4 5

6

7

8

10168 Harbinger Lvl L1202FX Manual.indd   6

7/8/14   3:10 PM

Содержание L1202FX

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды