Harbinger L1202FX, Руководство пользователя

Страница: 11 / 16

11
12-CHANNEL
MIXER
L1202FX Owner's Manual
EFFECTS SECTION
The Harbinger L1202FX includes a great-sounding digital effects processor. This chapter explains how to use it.
PRESET
The L1202FX Effects Processor has 16 presets. Each of these is a
different effect type. The preset names are listed on the top of the
mixer. They are explained in further detail below.
VARIABLE PARAMETER
This knob changes the character of the effect depending on the
effect type. It either changes the length of a reverb, the feedback/
repeat amount of a delay, or the depth of a modulation effect. See
the preset descriptions below for more information on how this
control works.
TAP
On effects presets with delay, press this button twice to set the
delay time. This is useful for setting the delay time in tempo with the
music. If you want a quarter note delay, press the Tap button on
two successive beats of the music and the delay time will jump to
that tempo.
SIGNAL/CLIP LEDS
These show the level going to the input of the effects processor.
When you send a channel to the effects processor, using the Aux
Send knob, you should see the green Sgn light turn on. If the level
gets too high, you'll see the red Clip LED turn on. If this happens,
turn down the Aux Send knobs on each channel to avoid distorting
the effects.
EFFECT PRESET CHART
The chart below describes the presets and what the Variable and Tap controls do for each one.
Preset Name Variable Paramenter Tap Control Description
1 Flanger Depth, from low to deep – Classic stereo flanger with a slow sweep
2 Chorus Depth, from low to deep – Chorus/ensemble effect with short delays
3 Delay-M
Feedback, from single repeat to long
repeating echos
Delay Time Simple mono delay, great for vocals and guitars
4 Delay-PP Feedback, from single repeat to long echo Delay Time
Stereo "Ping Pong" delay that jumps from left to right
output for complex effects
5 RV Plate
Decay & Brightness - from Short/Bright to
Long/Warm
–
Emulation of a '70s plate reverb – a smooth decay
for instruments
6 RV PPlate
Decay & Brightness - from Short/Bright to
Long/Warm
–
Plate reverb with a short (20ms) pre-delay, perfect
for adding space to vocals while keeping them clear
and intelligible
7 RV Room
Decay & Brightness - from Short/Bright to
Long/Warm
–
Emulates a small studio room, great for adding
ambience to drums and instruments
8 RV Hall
Decay & Brightness - from Short/Bright to
Long/Warm
–
Gives the sound of a concert hall, ideal for
keyboards, string, and wind instruments
9 RV Spring
Decay & Brightness - from Short/Bright to
Long/Warm
-
The sound of a spring reverb, adds a funky vintage
sound to guitars
10 VocD Detune amount, light to deep –
Vocal doubler effect – a Pitch shifter with a slight
echo to fatten vocals or guitars
11 Rev+DelM Reverb decay, short to long Delay Time Reverb with a short mono delay
12 Rev+DelPP Reverb decay, short to long Delay Time Reverb with a short stereo ping-pong delay
13 RV+Chorus Reverb decay, short to long – Reverb and chorus multieffect, nice on keyboards
14 RV+Flange Reverb decay, short to long – Reverb and flanger multieffect, interesting with guitar
15 RV+VocD Reverb decay, short to long –
Reverb with vocal doubler multieffect, great for
pop vocals
16 Rotary Depth light to deep –
Emulation of the rotary speaker from an organ, fun
for guitars or keyboards
10168 Harbinger Lvl L1202FX Manual.indd 11 7/8/14 3:10 PM