www.harbingerproaudio.com
13
Checklist
•
Also known as Daisy-Chaining, linking multiple speakers will
send the exact same input signal from one speaker to the next.
•
Make certain loudspeakers are Powered OFF and Levels
turned down.
• Connect the Mixer’s Output to the Input of Speaker 1.
• Connect the Output of Speaker 1 to the input of Speaker 2.
• Turn down the Mixer’s volume.
• Power
ON Mixer, then Power ON speakers.
• Bring the Mixer’s volume up to normal operating level.
•
Adjust the Level controls on the loudspeakers. Do not adjust the
Level so high that the Red LIMIT LED is constantly lit.
•
Set the Low Cut switch to ON if you want less bass response
and greater vocal clarity.
Linking Multiple HP Main Speakers (HP112, HP115, HP215)
MAIN OUTPUT
L
R
