12
Checklist
•
Make certain loudspeakers are Powered OFF and Levels
turned down.
•
Connect the Mixer’s Aux 1 Output to the Input of the first
Monitor speaker.
•
Connect the Mixer’s Aux 2 Output to the Input of the second
monitor speaker.
• Turn down the Mixer’s volume and Aux Send Master.
• Power
ON Mixer, then Power ON speakers.
• Bring the Mixer’s Aux Masters up to normal operating level.
• Adjust the Level controls on the HP112 loudspeakers.
•
Do not adjust the Level so high that the Red LIMIT LED is
constantly lit.
•
Set the Low Cut switch to ON if you want less bass response
and greater vocal clarity.
Two-channel HP112 Stage Monitors
AUX SEND
1
2
