background image

User Manual

2

Important Safety Instructions

DANGER

Exposure to extremely high noise levels may cause
permanent hearing loss. Individuals vary considerably 
to noise-induced hearing loss but most will lose some  
hearing if exposed to intense noise for a sufficient  
period of time.

The U.S. Government’s Occupational Safety and Health
Administration (OSHA) has specified the following
permissible noise level exposures:

According to OSHA, any exposure in the above permissible
limits could result in some hearing loss. Ear plugs or
protectors in the ear canal or over the ears must be worn
when operating this amplification system in order to prevent
a permanent hearing loss. If exposure in excess of the limits
as put forth above, to insure against potentially harmful
exposure to high sound pressure levels, it is recommended
that all persons exposed to equipment capable of inducing
high sound pressure levels, such as this amplification
system, be protected by hearing protectors while this unit is
in operation.

 

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE

 

OF NON-INSULATED “DANGEROUS VOLTAGE” WITHIN THE

 

PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE

 

TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

 

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE

 

OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING)

 

INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE UNIT.

 

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING

 

AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

 

SHALL BE PLACED ON THE APPARATUS.

IMPORTANT SAFETY INSTRUCTIONS

1.    Read all safety and operating instructions before using  

this product.

2.   All safety and operating instructions should be kept for 

future reference.

3.   Read and understand all warnings listed on the  

operating instructions.

4.  Follow all operating instructions to operate this product.
5.   This product should not be used near water, i.e. a bathtub, 

sink, swimming pool, wet basement, etc.

6.  Use only a dry cloth to clean this product.
7.    Do not block any ventilation openings. The product should 

not be placed flat against a wall or placed in a built-in 
enclosure that will impede the flow of cooling air.

8.    Do not install this product near any heat sources, such 

as radiators, heat registers, stoves or any other apparatus 
(including heat producing amplifiers) that produces heat.

9.    Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding-type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10.  Protect the power cord being walked on or pinched, 

particularly at plugs, convenience receptacles and the 
point where they exit from the apparatus. Do not break the 
ground pin of the power supply cord.

11. Only use attachments specified by the manufacturer.
12.  Use only with the cart, stand, tripod, bracket,  

or table specified by the manufacturer or  
sold with the apparatus. When a cart is  
used, use caution when moving cart/ 
apparatus combination to avoid injury  
from tip-over.

13.  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14.  Care should be taken so that objects do not fall and liquids 

are not spilled into the unit through the ventilation ports or 
any other openings.

15.  Refer all servicing to a qualified service professional. 

Servicing is required when the apparatus does not oper-
ate normally or has been damaged in any way, including 
damage to the power cord or plug, damage due to liquids 
spilled or objects dropped inside the unit, dropping the 
unit, or anything else that interrupts normal use of the unit.

16.  WARNING: To reduce the risk of fire or electric shock, do 

not expose this apparatus to rain or moisture.

17.  When a mains plug is used as the disconnect device, the 

disconnect device shall remain readily operable.

DURATION PER DAY (HOURS)  

1

SOUND LEVEL (dB)  

90  93  95  97  100  103

Содержание HA80









Отзывы: