10
Rear Panel Connections
AC Power Cord Input
This is the AC Mains connection. Use only the supplied IEC cable or a UL listed replacement
IEC Cable and 120V/60Hz AC outlet.
Speaker Outputs
L/Main
Connect up to two (2) loudspeakers to the speaker output jacks. Note that the
HA1000 power amp is rated at 4Ω Minimum Load. You
YY may safely connect 2 x 8Ω speakers
or 1 x 4Ω speaker.
Bridge Output (Mono)
Connect one (1) 8Ω speaker to this output. Note that damage
may occur to the HA1000 if using Bridge Mode with more than one 8Ω speaker.
R/Monitor
Connect up to two (2) loudspeakers to the speaker output jacks. Note that
the HA1000 power amp is rated at 4Ω Minimum Load. You
YY
may safely connect 2 x 8Ω
speakers or 1 x 4Ω speaker.
Note: Twist-lock outputs are configured 1+ (pos)/1- (neg).
AMPLIFIER ASSIGN
CHECK
"AMPLIFIER ASSIGN"
SWITCH ON FRONT PANEL
BRIDGE
BRIDGE
MAIN R
MONITOR
MAIN L
MAIN L + R
SPEAKER OUTPUT
L / MAIN
500W@ 4 OHM
250W@ 8 OHM
(4 OHM MIN. LOAD)
SPEAKER OUTPUT
R /MONITOR
500W@ 4 OHM
250W@ 8 OHM
(4 OHM MIN. LOAD)
BRIDGE OUTPUT
1000W@ 8 OHM
(8 OHM MIN. LOAD)
BRIDGE MODE
CLASS 2 WIRING
CLASS 2 WIRING
CLASS 2 WIRING
AC INPUT: 120V~60Hz
FUSE: T12AL AC250V
RATED POWER
CONSUMPTION: 1300W
This
This
This
This
29
30
Содержание HA1000
Страница 14: ......