HARBEN 903-1315, Руководство по эксплуатации и техническому обслуживанию

Страница: 9 / 61

9
2. Scope of Supply
2.1. Scope of Supply
Unit: ELIMINATOR VANPACK
2.2. Vanpack Assembly
The General Arrangement drawing: 003-295, defines the components of the Eliminator
Vanpack mounted Pump Assembly as follows:
Water is fed from a “mains” supply through a manual low-pressure inlet hose reel into a plastic
water storage tank. The tank supplies the pump with a positive head of pressure via an inline
Hypro strainer that filters the water to approximately 177 microns, (Pump is specified at
200microns)
The Speck high-pressure plunger pump is driven by a Kubota D1105-E4B-EU-X1 18.5kW
Stage 5 C-TXT industrial diesel engine through a Speck NP25 gearbox.
The water is directed by an electrically controlled Hydraulic diverter valve, to a hydraulically
driven hose reel c/w 300’ of ½” hose, or at low pressure ‘dumped’ back to tank.
The system is protected from over pressurisation by means of a Hawk safety relief Valve.
The system pressure can be adjusted by means of a Speck UL221 Unloader Valve.
The engine and system pressure can be monitored at the control panel situated at the rear of
the van.