HARBEN 4018 DSK Скачать руководство пользователя страница 7

Страница: 7 / 55

1.3. Scope of this Manual

This manual provides operation, maintenance, and safety instructions for the multi-skid

package. Where the multi-skid package has been fitted with proprietary components, details

of these are also included in this manual.

This manual is compiled to match the Scope of Supply detailed in Section 2. All specifications,

descriptions and parts lists refer only to the components in the version of the unit detailed in

this scope of supply.

Maintenance instructions included in this manual include:



Routine maintenance to be carried out at specific times.



Maintenance of the high-pressure pump.

Repairs to the pump crankcase are not considered maintenance operations as these should

be undertaken only by HARBEN INC

their approved agents, or at least competent automotive

engineers.

1.4. The DSK Multi-Skid Package

Harben® multi-skid packages have been designed to the highest standards so that they will

work safely and reliably for many years. It is important that you take time to read the

information provided in this operation and maintenance manual so that you understand how

to make the most of the multi-skid package in accordance with the instructions. Harben® multi-

skid packages are powerful pieces of industrial equipment and should only be operated by

competent users who understand that serious injury or death can occur through misuse.

The skid package described in this operation and maintenance manual are intended to be

used for high-pressure water jetting and pumping applications.

They will remove soft blockages, tree roots and hard scale, liquefying fats and restoring drain

flow by blasting high-pressure water through a drain nozzle connected to the end of a high-

pressure hose. Some models can be fitted with jump jets kits to increase the effective cleaning

distance.

Harben multi-skid packages use diesel engines to power a high-pressure water pump up to

5,000 psi and 18 GPM.

Additional accessories can be purchased from Harben®, such as: floor cleaners, jetting guns

and jet pumps which extend the range of work that can be carried out with the jetter. Safety

information relating to individual accessories is provided later in this section.

Содержание 4018 DSK
























































Результаты поиска

Содержание 4018 DSK

Отзывы:

Бренды по названию

Популярные бренды

HARBEN 4018 DSK, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание 4018 DSK

Отзывы:

Бренды по названию

Популярные бренды