HaptX Gloves DK2, Руководство пользователя

Страница: 9 / 18

DK2 User Manual - © HaptX Inc. 2022
Page 9
4.3 Attach Gloves to Air Controller
If using in the stationary configuration, attach the right Glove to the teal port and the left Glove to the
white port If using the DK2 in the room scale configuration, attach the left Glove to the teal port and
the right Glove to the white port (See page 8)
1 2
3
4 5
6
1.
Inspect the Glove gasket for missing o-rings The o-rings are critical for proper glove func-
tionality Note: Holes that are used for alignment pins should be empty (4 locations for 3
pins along the outside ring)
2.
Install the Glove gasket by aligning pins to the holes
3.
Line up the pins to the Glove tether and attach it to the Air Controller
4.
Tighten the Glove onto the Air Controller by hand
5.
Then tighten an additional quarter turn with the Connector Wrench
6.
Attach the USB cable