HaptX Gloves DK2, Руководство пользователя

Страница: 14 / 18

4.10 Doffing the HaptX Glove
Release both lacers by spinning counterclockwise When you hear a click the lacer is released
You may need to pull the wrist cuff outward to loosen the wrist lacer Alternate pulling on the
fingers and back of hand casing to doff the Glove
Warning: do not pull only on the fingertips, you may damage the Gloves.
DK2 User Manual - © HaptX Inc. 2022
Page 14
5 Shutdown process
When you are done using HaptX Gloves DK2 or are looking to move the system to a new location:
1. On the back of the Air Controller, toggle the power switch off
2. On the top of the Smart Compressor, firmly press the Run/Stop button The compressor will au-
tomatically run a 30 seconds purge cycle to remove water from the moisture separator Once you
hear the compressor stop, toggle the power switch to off
3. The system is now off If you are packing the system, you can disconnect everything and follow
the diagrams on the supplies boxes Use the Glove wrench to remove the Gloves from the Air Con-
troller and do not forget to store the Glove gaskets in their case