13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Assembling the Fan Without the Light Kit
Assembling the fan without the
light kit
1
□
Remove the three light kit mounting screws (MM) on the
black bracket below the fan-motor assembly (D).
□
In order to use the fan without the light kit, remove the
switch cup (WW) from the top of the light kit fitter assembly
(E) by removing the center hex nut (NN) inside the switch
cup (WW), and then thread the switch cup (WW) off the
threaded nipple on the top of the light kit fitter assembly (E).
□
Press the plastic plug (EE) (provided) into the center hole of
the switch cup (WW).
□
Connect the quick connect couplers. (The fan will not start
without this connection).
□
Position the switch cup (WW) onto the black bracket and
reinstall the light kit mounting screws (MM).
IMPORTANT:
It is critical to attach the switch cup using the
quick connector. The fan will not operate unless the light kit
is connected to the fan.
D
WW
EE
AA
MM
WW
NN
E
