HappyJapan HCR3E Series, Инструкция

Страница: 99 / 330

-DE -110
9-Ca
POSITION / BOBBIN THREAD ALARM
16_2 U801
Bobbin thread alarm
By entering the number of stitches per one bobbin, the machine can be stopped automatically
when the remaining amount of bobbin thread becomes low.
Also, the alarm message will be displayed on the screen.
When the number of stitches is entered, the bobbin thread progress bar will be displayed just
below the embroidery progress bar.
The bobbin thread progress bar shows rough remaining amount, and then the bobbin can be
exchanged before empty completely.
Setting
1. Press ”Frame forward”.
2. Press .
Setting value : Setting value: Register the num-
ber of stitches possible per one bobbin.
Current value : Current value: Display the current
number of stitches after exchange the
bobbin.
Press
to reset the value.
: Setting value: Register the number of
stitches possible per one bobbin.
: The machine calculates the number of
stitches that can be embroidered with
one bobbin.
: The machine calculates the number
of stitches that can be embroidered by
inputting the remaining amount (diameter)
of the bobbin thread.
Auto stop at cut. : sAuto stop at cut: The ma-
chine will be stopped automatically at
first thread cut point after exceeding the
preset stitches.
Stop at count over. : Stop at count over: The ma-
chine will be stopped automatically when
the machine reaches the preset stitches.
: Set various conditions for the machine
to calculate the number of stitches that
can be embroidered.
9-Cc
Remaining amount of bobbin
thread