HappyJapan HCR3E Series Скачать руководство пользователя

Страница: 82 / 330

-RA -68

BORER (Option)

15_1 M717

8-4

Important safety instructions

When using an appliance, basic safety precautions should always be followed, including the

following.

WARNING

- To reduce the risk of injury to persons:

1. An appliance should never be left unattended when plugged in. Always unplug this appliance

from the electric outlet or switch main breaker OFF after using and before cleaning.

2. Do not allow to be used as a toy. Close attention is necessary when this appliance is used by

or near children.

3. Use this appliance only for its intended use as described in this manual. Use only

attachments recommended by the manufacturer as contained in this manual.

Keep fingers away from all moving parts. Special care is required around the sewing

machine needle and borer blade.

Switch the sewing machine off (“0”) when making any adjustments in the borer device area,

such as changing borer blade, etc.

SAVE THESE INSTRUCTIONS

ES-HMF-5112-1

Fear of serious injury.

Keep fingers away from

the needles while

the machine is running.

WARNING

ES-HMF-5112-1

Fear of serious injury.

Keep fingers away from

the needles while

the machine is running.

WARNING

For safe use of this device, we highly recommend to use “Safety Sensor” (option) together.

“Safety Sensor” will stop machine, when your hand gets closer to needles or knife.

Please contact your local distributor to get more detail information.

Borer

Borer blade

Содержание HCR3E Series











































































































































































































































































































































Результаты поиска

Содержание HCR3E Series

Отзывы:

Похожие инструкции для HCR3E Series

Бренды по названию

Популярные бренды

HappyJapan HCR3E Series, Инструкция

Результаты поиска

Содержание HCR3E Series

Отзывы:

Похожие инструкции для HCR3E Series

Бренды по названию

Популярные бренды