HappyJapan HCD3, Инструкция

Страница: 89 / 251

-DA -107
9-Cc
POSITION / BOBBIN CHANGE ALERT
16_2 R801
4. Input the stitich number and press .
The standard bobbin which is winded with #120
cotton thread will be used around 30000 stitches.
But, the consumption of bobbin thread is varied
depending on embroidery conditions such as stich
type, stitch length and thread tension.
It is recommended to enter the value to 30000
stitches as first setting.
The option of auto stop function can be selected (
) from “stitch number” and “thread cut point".
5. Press .
6. Press to return to Drive mode.
1. Press .
During embroidery, the red progress bar which
shows the remaining amount of bobbin thread will
be extended until the preset stitches.
When the auto stop function is activated.
The machine stops automatically.
When the machine is stopped by manually.
2. Press
when the bobbin is not required
to exchange.
The setting value will not be reset and the stitch
will be counted continuously.
Press when the bobbin is
required to exchange.
The setting value will be reset to “zero” and the
progress bar becomes blue.
Auto stop option
Remaining amount of bobbin thread
Setting correction
Correct the setting value to display the alarm message at proper timing.