sections of the fence from the main lead out wire/s. Measure
the voltage and determine whether the voltage has improved.
If after disconnecting a section of the fence you record a
significant improvement in fence voltage, it is likely that the
fault is located in the section of fence that you have just
isolated. Often a visual inspection of the faulty section will
reveal the problem.
There are no lights flashing on the electric fence energizer
Check the power supply. If the fence charger is connected to
the line power adapter, ensure that the power is switched on.
Disconnect the power then reconnect the power 30 seconds
later.
If fence energizer is connected to a 12V battery, ensure that the
positive (red) clip is connected to the positive terminal on the
battery and the negative (black) clip is connected to the
negative terminal on the battery.
If the fence energizer’s pulse light still does not flash,
disconnect the battery then reconnect the battery 30 seconds
later. Also, check the battery voltage.
Happy Henhouse Tel: 314-690-
1399
3377 Hwy E Email:
[email protected]
Perryville, MO 63775 www.happy-
henhouse.com
