hapco X-20, Руководство пользователя

Страница: 6 / 13

6
Safety & Maintenance
Unit will become warm to the touch
and possibly hot when in use.

Unit MUST be securely mounted to a bench, heavy duty cart, or
other sturdy surface before using. The 3/8” fastening holes in base
units can be used to secure unit.

No flammable materials(i.e. solvents) should be placed near or inside
the X - 20 unit.

The location of the X - 20 unit should provide enough clearance for the
swinging lid to open.

A suitable 15 AMP, 115 VAC circuit should be within 5’ of the X - 20
unit.
Note: This device uses 440 WATTS at 120 VAC @ 60 HZ. Users in a foreign country
are responsible for procuring the proper converter that meet the standards and require-
ments for use.

A sufficient clean, dry air supply should be available to pressurize the
unit.

Use “ DANGER DO NOT OPEN ” tag on each machine while they
are under pressure.

Clean debris from top of shelf and underneath on a daily basis.

Check fittings and valves for pressure leaks on a weekly basis.

Grease the tips and threads of 6 clamping bolts and check cover align-
ment on a monthly basis.(See Pg. 12)