hapco X-11, Руководство пользователя

Страница: 8 / 13

8
Using The X - 20
2. Close the lid and securely tighten the swinging “ C ” clamps.
To prevent the seal from deforming, tighten the clamps in a
crisscross sequence as opposed to a clockwise or counter -
clockwise sequence. Be careful not to over - tighten.
WARNING : Exceeding 200 inch pounds may distort the
gasket and cause damage to the sealing surface.
4. Slowly open the ball valve until desired air pressure is reached.
70 - 80 PSI is recommended.
1. Place molds and parts on the shelf, making sure they are level.
3.Attach the air hose to the unit while in the “ shut ” position ”.
5. When the desired pressure is reached, close the ball valve
and remove the air hose. We recommend 70 - 80 PSI for
most applications.
For heating instructions please see page 10.