12
1.) Slightly loosen center
2.25”
bolt and center cover so that it is
concentric with the outside diameter of the tank.
2.)
Securely
tighten the swinging
“
C
”
clamps in a crisscross pattern,
as you would tightening lug nuts on a tire,
EXCEPT
for the clamp
on the hinge arm. (Should remain slightly loosened)
3.) Tighten down the
15/16”
vertical bolts that attach the hinge arm to
the side of the tank.
4.) Using a large flat jaw adjustable wrench, tighten down the center
bolt as securely as possible.
NOTICE:
Due to repeated opening/closing, cover may have tendency to loosen over time
and cause misalignment. To re
-
align the cover, follow the steps below.
Cover Realignment
Содержание X-11
Страница 1: ...The User Guide to The X 20 Molding Chamber...
