Hanwha Vision PNO-A9311R, Руководство пользователя

Страница: 10 / 31

installation & connection
10_
installation & connection
J
`
Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product.
` Make sure to tighten the screw firmly when assembling the micro SD card slot cover to ensure it's watertight.
` Before installing the camera, the Micro SD card should be inserted while the power source and the body are separated.
` When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended.
` When installing/removing the Micro SD card, make sure you put the product body on a flat ground before working on it in order
to prevent accidents due to loss or drop of any parts.
Removing a Micro SD card
Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD
card from the slot.
a
b
J `
Before removing the Micro SD card, in <
Setup ( )
>-<
Event
>-<
Storage
>, set the device to <
Off
> and press the [
Apply
]
button and turn the camera off.
`
If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.