28_
flush mount dome camera
flush mount dome camera
Installation (camera case)
J
`
Use a cable bushing compliant with the network cable to be connected.
-
Components: use a cable with the diameter of Ø5 to 8.5
[Installing network/power cables]
1-1.
Pull off the extruded parts of the cable bushing to be used.
1-2.
Route the network cable through the big hole of the cable bushing and connect to the network cable
connector.
1-3.
(When using the power) Route the power cable through the small hole of the cable bushing and connect
it to the provided terminal block.
1-4.
Mount the cable bushing to the housing.
[Installing the network cable]
2-1.
Pull off the extruded part of the 1-hole cable bushing provided.
2-2.
Use the cap installer to pass through the RJ45 cable.
Cap Installer
2-3.
Mount the cable bushing to the housing.
Содержание Wisenet XNV-9082R
Страница 56: ......
