Hanwha Techwin WISENET SCB-6005, Руководство пользователя

Страница: 28 / 35

28_ camera operation
camera operation
- FONT COLOR : You can change the OSD font color.
(WHITE, YELLOW, GREEN, RED, BLUE)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the
camera through an external control device.
➊
MM
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates ‘COMM ADJ’.
➋
Select a desired mode using the Function Setup switch.
- PROTOCOL :
Select the communication
(SAMSUNG-T, HONEYWELL,
BOSCH, PELCO-P, PELCO-D)
- CAM ID : Determines the camera's
identification number (between
0 and 255).
- DISP ID: Determines whether
camera ID is displayed or not.
- BAUD RATE : You can select
2400/4800/9600/19200/38400 bps .
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
- COAX : You can select whether to use COAX communication.
- RETURN : Return to the SPECIAL menu.
y
IMAGE ADJ
❶ MM
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘IMAGE ADJ’.
❷
MM
Select a desired mode using the
Function Setup switch.
- GAMMA : The setting range is 0.35~ 1.0.
The closer to 1.0 the setting is,
the darker it gets.
COMM SETUP
 1.
PROTOCOL
SAMSUNG-T
2.
CAM ID
I
IIIIIIIIIIIIIIIIIIII
1
3.
DISP ID OFF
4.
BAUD RATE 9600
5.
UART MODE 8-N-1
6. RET PKT DISABLE
7. COAX ON
8. RETURN
IMAGE SETUP
 1.
GAMMA
USER
2.
PED LEVEL I
IIIIIIIIIIIIIIIIIIII
5
3.
COLOR GAIN
IIIIIIIIIII
I
IIIIIIIII
55
4. H-REV OFF
5. V-REV OFF
6. SHARPNESS ON
7.
RETURN