Hanwha Techwin WiseNet HCB-6001, Руководство пользователя

Страница: 30 / 40

30_ camera operation
camera operation
-
AUTO : The mode is switched
to ’Color‘ in a normal
environment, but switches
to ’B/W‘ mode when
ambient illumination
is low. To set up the
switching time for AUTO mode, press the Function Setup switch. You can
turn on or off the burst signal on B/W mode.
y
BURST MODE : Activate or deactivate the burst mode to maintain or remove
the color signal.
y
DURATION : This function is used to select the brightness of light where
switching occurs.
y DWELL TIME : You can select day/night switching delay time from.
 3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
M
`
If you set the AGC mode to off on the exposure menu, you cannot switch the day/night
mode to auto.
`
When a bright light source is in the screen or there are frequent brightness changes, if
you use the auto night/day mode, and set the switching time to short (3, 5 sec), a hunting
can be caused. In this situation, it is recommended to use the default setting (30 sec).
- EXTERN : Ground to the grounding terminal to allow automatic switching between
COLOR and B/W (Black/White).
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
M
`
If the lens mounted in the camera is different from the one set in <LENS> of the
<EXPOSURE> menu, then the night/day mode may not operate normally.
y
DEFOG :
You can use the defog mode to allow the camera to automatically detect
the fog density of the screen and display a clear image despite smog, fog
or general poor visibility.
➊
MM
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates ‘DEFOG’.
➋ MM
Select a desired mode using the Function Setup switch.
- AUTO : Adjust the level automatically.
AuTO SETuP
▶
1. BuRST MODE ON
2.
DuRATION NORMAL
3.
DwELL TIME
30 SEC
4. RETuRN