Hanwha Techwin WiseNet HCB-6001, Руководство пользователя

Страница: 28 / 40

28_ camera operation
camera operation
➎ MM
Enter a title, move the cursor to ‘POS’ and press the
Function Setup switch. The entered title appears on
the screen. Select the position to display the title on
the screen by using the Function Setup switch and
press the Function Setup switch. When the position
is determined, select ‘END’ and press the Function
Setup switch to return to the DISPLAY menu.
M
M
`
When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you
enter one.
`
and Numbers are available in this mode.
`
If you move the cursor to CLR and press the Function Setup switch, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
Function Setup switch. Move the cursor over the letter to be edited, move the cursor
to the letter to be inserted and then press the Function Setup switch.
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the
camera through an external control device.
➊ MM
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘COMM ADJ’.
➋
Select a desired mode using the
Function Setup switch.
- PROTOCOL :
Select the communication
SAMSUNG-T/SAMSUNG-E/
PELCO-D/PELCO-P/BOSCH/
HONEYWELL )
- CAM ID : Determines the camera's identification number (between 0 and 255).
- DISP ID: Determines whether camera ID is displayed or not.
- BAUD RATE : You can select 2400/4800/9600/19200/38400 bps .
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
COMM SETuP
▶
1.
PROTOCOL
SAMSuNG-T
2. CAM ID
I
IIIIIIIIIIIIIIIIIIII
1
3. DISP ID OFF
4.
BAuD RATE 9600
5. uART MODE 8-N-1
6.
RET PKT ENABLE
7.
COAX ON
8. RETuRN
FRONT DOOR