Hanwell MS1000, Руководство по установке

Страница: 10 / 34

MS1000 Control System
Installation Guide
GD6063-1 Page 8 of 30
hanwell.com
2.2.1.2 Hanwell SR2
The SR2 Hanwell Smart Receiver/Controller is a network enabled receiver, designed for
continuously monitoring environmental data from multiple points within a site, or across
multiple sites, receiving and processing data signals from Hanwell radio and wired sensors.
Additionally, the SR2 can be fitted with up to eight onboard probes and can be upgraded to a
transceiver to both receive and re-transmit the data.

Each SR2 can handle data from up to 253 sensors and, as up to 16 SR2s can be run on a
single system, up to 4048 sensors can be connected to a single system.

The SR2 logs all received data in its on-board 512kb memory.

The software continually interrogates the SR2 for the most recent data and downloads
the data according to user-defined logging periods to the server or operating PC from
where software users can view live and historic data, produce out of specification and
summary reports and set alarms for both the data values and the rate of change of the
data’s values.

An optional remote Receiver can be connected to improve radio reception in difficult
areas.

Alarm relays are included: these can indicate that the readings are out of specification
and can, optionally, be set to indicate a network failure.
An MS BUS connection allows the SR2 to drive the Hanwell MS1000 Control System.
2.3 Output Cards
Input signals generated by sensors are either passed directly to the MS1000 Control System
or passed to a CR3 or SR2 Controller for processing, before transmission to the MS1000
Control System.
Output signals from the MS1000 Control System to the systems/equipment under control are
generated by Output Cards located within the MS1000 Control Unit.