HENAN HANWEI ELECTRONICS CORP LIMITED
www.hwsensor.com
E-mail: hwsensor@163.com
Alcohol
concentration
Short of Volt
Warm up, please wait
Higher than preset level
Ready for blow
Alcohol
concentration
Units
Digital
results
ALC Nose
AT-126 Breath Alcohol Tester
Reminding Before your testing
Alco Nose Breath tester should be used only to give an indication of the possible presence of alcohol in the breath/blood.
You should not rely upon it as the sole basis to determine intoxication or whether it is safe to drive a vehicle, operate
equipment, or engage in dangerous activities.
Everyone has different body responds to alcohol consumption and his testing result only as reference, not a subject
standard for consequent decision.
The manufacture, importer or distributor takes no responsibility whatsoever for the use of
this product for any reason. This product must not be used as a tool for determining whether a person is able to operate a
motor vehicle or device legally or safely. The intake of any alcohol will impair reflexes and judgment to operate motor vehicle.
Main Features:
Advanced NM hot-wire alcohol sensor;
□
Quick response;
□
SMD assembling, stable performance;
□
MCU control;
□
Cartoon and LCD indication, backup light
□
Portable and small design
□
No Touch Healthy design;
□
Sensor fault self-checking;
Battery saved design, low Volt warning.
Main Technical Info:
Sensor Type: Hot-wire alcohol sensor
Detection Range: 0.00
～
1.00mg/L(0.00
～
0.20%BAC
；
0.00
～
2.00g/L)
Alarming Level: 0.24mg/L (0.05%BAC; 0.5g/L)
Working Volt: DC3V
（
2
×
AAA batteries
）
Battery using time:
≥
60 times
Using Environment: Tem
：
0
℃～
45
℃
Relative Hum
：≤
93% No Dews
Response Time:
＜
8S Warm-Up:
＜
18S
Indication Manner: 3 digital LCD with cartoon indication
Dimension: l
×
b
×
h, 103
×
37
×
19 mm
≤
45 g
Structure and function Direction
3.2 Function Direction,
shown as Fig 1
：