Henan Hanwei Electronics Co.,Ltd
www.hwsensor.com
AT6000 Alcohol Tester for Personal Use
Preface
Reminding Before your testing.
Alco Smart Breath tester should be used only to give an indication of the possible presence of
alcohol in the breath/blood. You should not rely upon it as the sole basis to determine intoxication
or whether it is safe to drive a vehicle, operate equipment, or engage in dangerous activities.
Everyone has different body responds to alcohol consumption and his testing result only as
reference, not a subject standard for consequent decision.
The manufacture, importer or distributor takes no responsibility whatsoever for the use of this
product for any reason. This product must not be used as a tool for determining whether a person is
able to operate a motor vehicle or device legally or safely. The intake of any alcohol will impair
reflexes and judgment to operate motor vehicle.
Before your testing, please view the manual carefully and follow the instruction strictly.
General Introduction
AT6000 breath alcohol tester is kind of tester designed to measure concentration result of the
breathed alcohol in the human body. This device adopts advanced NM Hot-wire alcohol sensor which
has excellent sensitivity and reproducibility, fashion and portable design make it more convenient for
personal use. When the alcohol content exceeds the preset limited level, this device would send an
audio and video warning to remind your safety.
Main Feature
:
Advanced NM Hot-wire alcohol sensor
Quick response
SMD assembling, stable performance
Smart MCU control
Direct testing process LCD indication
Digital LCD display with light blue backup
Portable and fashion design
Audio warning beyond pre-set limit
Sensor Fault Self checking
Battery saved design, low voltage indication
Technical Data
Sensor type: NM Hot-wire alcohol sensor
Detection Range: 0.00 1.00mg/L (0.00 0.20%BAC; 0.00 2.00g/L; 0.00 2.00‰BAC)
Alarming Level: 0.24mg/L (0.05%BAC, 0.50g/L; 0.50‰BAC)
Accuracy: ±5% F.S
Response Time: 5s Warm-up Time: 20s
Resume Time:
≤
20s
Working Voltage: DC4.5V 3×AAA Batteries; Working Current:
≤
120mA
Working Environment: Temperature -10
50 Relative Humidity
≤
95% No Dews
Display: 3 digits LCD display with light blue backup
Dimension: 103×65×27mm (L×W×H),
≤
64 g Battery excluded
Battery expectancy time:
≥
200Times
E-mail: [email protected] Fax:86-37167169090