Quick Start
EN
Copyright Qingdao Hantek Electronics Co., LTD
HTM200 user manual
15
displayed in the status bar. At this time, all buttons except this button and the power
button are disabled. Press this button again and all the buttons will be available again.
4 Bluetooth Switch
If the instrument supports Bluetooth communication, hold down the button for more
than 3 seconds, the backlight of the button will be on, and the Bluetooth symbol
will
be displayed in the status bar, which indicates that the Bluetooth is enabled. Hold down
this button again for more than 3 seconds to turn off the Bluetooth function.
5 Auxiliary button
Press the button to enter the system menu, you can set users, save files and view
information.
6 Temperature upper limit and lower limit alarm control switch
The alarm function is turned on by default. When the measured temperature is higher
than the upper limit or lower than the lower limit, the buzzer will alarm (ringing). Press
the button, the backlight of the button will be on, the alarm closing symbol will be
displayed in the status bar, and the alarm function will be off. At this time, if the
measured temperature is higher than the upper limit or lower than the lower limit, the
buzzer will not alarm.
7 Power button
Press the button when shutdown, the instrument will start up. Press the button on state,
the instrument will turn off.
8 Measurement list shortcut button
In any interface, press
button to quickly access the < List >page.
9 Direction buttons
Under the menu page or when entering a value, up, down, left and right arrow buttons
are used to change the cursor
’
s position. When changing the date and time, the up and
down arrow buttons are used to change the value, and the left and right arrow buttons
are used to change the cursor
’
s position.
10 Thermocouple connection end
11 Shortcuts for saving files
Quickly access the page for saving files.
12 Screen brightness shortcut button
Adjust screen brightness in a loop.
13 Delete button
