Hantek HDG3000B Series Скачать руководство пользователя страница 67

Страница: 67 / 102

Modulation

phases".

⚫

Use the numeric keypad or direction keys and knob to input the desired rate value.

⚫

The rate range is from 2mHz to 1MHz and the default is 100Hz.

8.9.6 Modulation Phase

Press

[Mod] >

Phase1

Phase2/Phase3

softkeys to set the parameter.

⚫

Use the numeric keypad or direction keys and knob to input the desired amplitude

value.

⚫

The phase range is from 0º to 360º. The default is 180°. The default values for

phases 1, 2, and 3 are 45°, 135°, and 225°, respectively.

8.10

3FSK Modulation

Users can configure the instrument to "shift" its output frequency between three preset

values using 3FSK modulation. The rate at which the output shifts between the three

frequencies (called the "carrier frequency" and two "hop frequencies") is determined by

the internal signal level of the instrument.

8.10.1 Select 3FSK Modulation

Press

[Mod] >

Type

3FSK

softkey to enable 3FSK function.

⚫

When

Mod

is enabled,

Sweep

Burst

will be disabled automatically.

⚫

After 3FSK is enabled, the instrument will generate 3FSK waveform with the

currently specified carrier and modulating waveforms. To avoid multiple waveform

changes, enable modulation after configuring the other modulation parameters.

8.10.2 Carrier Waveform Shape

3FSK carrier shape: Sine (default), Square, Ramp, Pulse, Arbitrary (except DC) or

Harmonic waveform.

⚫

Press

[Wave]

button on the front panel to select the desired carrier waveform.

⚫

Noise and DC could not be used as carrier waveform.

8.10.3 Carrier Waveform Frequency

For different carrier waveforms, the settable range of carrier frequency is different.

please refer to "Frequency Characteristics" in Specifications. The default value is 1kHz.

Press

[Setting] >

Frequency

softkey on the front panel, and then use the numeric

keypad or direction keys and knob to input the desired frequency value.

Содержание HDG3000B Series







































































































Результаты поиска

Содержание HDG3000B Series

Отзывы:

Похожие инструкции для HDG3000B Series

Бренды по названию

Популярные бренды

Hantek HDG3000B Series, Руководство пользователя

Результаты поиска

Содержание HDG3000B Series

Отзывы:

Похожие инструкции для HDG3000B Series

Бренды по названию

Популярные бренды