Application measurement
EN
HBT3000 series user manual
Copyright © Qingdao Hantek Electronic Co., LTD
34
⚫
When the number of valid data (excluding test anomalies) is 1, the sampling
standard deviation and process capability index are not displayed.
⚫
When
σ
n-1 is 0, Cp and CpK are 99.99.
⚫
The upper limit of Cp and CpK is 99.99. When Cp and CpK>99.99, it is displayed
as 99.99.
⚫
When CpK is negative, CpK=0.
Click on
[STAT] ->
Statistical Results
->
Statistical List
, and the statistical list will
be displayed as follows:
Figure 6-13 Statistical List
Figure 6-14 Statistical List
Compare the maximum and minimum values of voltage and resistance set in the
comparator function with the statistical data. If the statistical data is within the
comparison range, the corresponding voltage or resistance will be displayed in
white; If it is not within the comparison range, the corresponding voltage or
resistance will be displayed in red; If the voltage and resistance values are both
within the comparison range, the comparison result shows PASS; On the
contrary, display UNPASS. The judgment results PASS and UNPASS (Hi, In, Lo of
resistance and voltage respectively) can be output to EXT I/O.
