Hantech 4619277, Руководство по эксплуатации

Страница: 23 / 180

EN
21
2:Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the
drainage pipe becomes
dry, so as to keep the inside of the body in a dry state and prevent it from mildewing.
3:Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping
post; install the water
plug and the drainage cover.
4:Remove the exhaust pipe and keep it properly.
5:Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep
it out of the reach of children, and take dust control measures.
6:Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine components properly.
IX.Troubleshooting
Do not repair or disassemble the air conditioning by yourself. Unqualified repair will lead
to failure of the warranty card, and may cause damage to users or their properties.
Problems Reasons Solutions
The air
conditioning
does not work.
There is no electricity.
Turn it on after connecting it to a socket
with electricity.
The overflow indicator displays
"FL".
Discharge the water inside.
The ambient temperature is too
low or too high Recommend to use the machine in at
the temperature of 7-35 ℃ (44-95 ℉).
In cooling mode, the room
temperature is lower than the set
temperature; in heating mode, the
room temperature is higher than
the set temperature.
Change the set temperature.
In dehumidification mode, the
ambient temperature is low.
The machine is placed in a room with an
ambient temperature of greater than 17
℃ (62 ℉).
There is direct sunlight. Pull the Curtain.