WS281x Pixel Output
The rPi-MFC has 1 WS281x (WS2811, WS2812, WS2813, INK1003 etc) that can have up to 1000 pixels
controlled. The number of pixels that can be controlled depends on the frame rate 25ms, 40ms etc that FPP
and the FSEQ is configured for. The rPi-MFC uses WS281x output 2 which is on pin 35/GPIO19.
Network Setup
After initially accessing FPP I recommend setting a static IP in the same network range as your computer/s
and router. These will typically be in the 192.168.0.x or 10.0.x.x ranges. The netmask of 255.255.255.0 is
typical but 255.255.0.0 can be used if computer and FPP are in slightly different IP ranges eg. 10.0.0.x and
10.0.1.x .
