Hanskamp MultiFrame, Инструкция по установке

Страница: 3 / 8

3 - 8
Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en
MultiFrame
EN
075 - 000 - 000
Mounting PipeFeeder
1. Mount the PipeFeeder to the MultiFrame with included mounting material
as shown in Figure 5.
2. Make sure the bottom of the PipeFeeder is level with the top of the feed-
trough
3. In order to let the PipeFeeder dosing nicely into the feedtrough, it is desira-
ble to rotate the tube of the PipeFeeder 45° so that the discharging section
is hung above the feedtrough.
Please note! If the stainless steel tube of the PipeFeeder is rotated with pertaining
to the plastic part make sure that de PipeFeeder is re - adjusted in order to maintain
the anti - spill function. For adjusting the PipeFeeder see manual 001 - 847 - 000
Adjust the PipeFeeder not to the MultiFrame by a truss structure or similar. Then
the PipeFeeder can also be mounted on the wall. The distance between the wall
and the PipeFeeder remains unchanged from mounting on the MultiFrame. For
example, all PipeFeeders remain perfectly straight line in order to keep the parlour
tight.
MultiFrame degree positions
The MultiFrame 30° is the complete MultiFrame as described above. These will be
delivered without sidefence. 40°, 50° & 60° parlours can be made with a short side
fence (art.nr.: 007
- 504 - 000). 70° & 80° parlours can be made with a long side fence
(art.nr.: 007 - 505 - 000).
40° & 50° 60°
70° 80°
5
6
007 - 504 - 000
007 - 505 - 000