Page EN-27
Troubleshooting table
Troubleshooting table
Problems with operation
Problem
Possible cause
Solution
The dishwasher
cannot be switched
on.
The mains plug has not
been inserted into a socket.
Connect the mains plug to the socket.
There is no voltage being
supplied through the sock-
et.
Check the fuse. Check the socket by con-
necting another device.
The selected dish-
washer programme
will not start or it
stops.
The dishwasher’s door is
not closed properly.
Close the dishwasher door.
The water tap is not proper-
ly on.
Turn the water tap on completely.
The inlet hose is defective.
Contact our service team
(see page EN-30).
There is a risk of overflow-
ing. The electrical water
stop system has been acti-
vated.
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■
Only authorised specialists may re-
pair the dishwasher. Contact our ser-
vice team if in any doubt (see page
EN-30).
■
Only carry out the actions which are
described in this user manual.
■
Never repair defective dishwashers –
or dishwashers which you presume to
be defective – yourself. You can en-
danger yourself and subsequent us-
ers.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
If water overfl ows, close the water
supply immediately and do this be-
fore contacting the service team (see
page EN-30).
■
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a programme.
Содержание WQP12-J7609D
Страница 34: ...Produktdatenblatt gemäß VO EU Nr 1059 2010 Seite DE 34 ...
Страница 67: ...Page EN 33 ...